PETE Bottle Injection Stretch Blow Molding Machine
Injection stretch blow molding machine from injection PET preform, stretch blow molding and demoulding step, no flash, no nozzle material, product appearance integrity is very good. The bottom and seam line of the product are smooth and transparent. Stretch blown products can have more uniform wall thickness than non - stretch products. One-step injection stretch blow molding machine is more efficient and energy saving.
PETE Raw Material and PET Bottle Products
ITEM |
UNIT |
MACHINE MODEL |
||
CR-320-V4 |
CR-400-V4 |
CR-600-V4 |
||
Screw Diameter |
MM |
40 |
45 |
50 |
Diameter L/D Ratio |
24 |
26 |
26 |
|
Diameter Stroke |
MM |
160 |
160 |
200 |
Theoretical Injection Capacity |
G |
260 |
330 |
510 |
Injection Clamping Force |
KN |
280 |
280 |
300 |
Blowing Clamping Force |
KN |
80 |
100 |
120 |
Driving Power-Rated |
KW-380V |
22 |
22 |
45 |
Heater Power-Rated |
KW-220V |
8.9 |
8.9 |
12 |
Wheel Diameter |
MM |
680 |
800 |
1200 |
Max. Daylight |
MM |
700 |
700 |
700 |
Min. Daylight |
MM |
400 |
400 |
400 |
Max Pump Pressure |
MPA |
14 |
14 |
16 |
Tank Volume |
L |
400 |
450 |
550 |
Dimension Of Machine |
M |
4.0x1.3x2.9 |
4.35x1.65x2.9 |
4.6x1.8x3.0 |
Machine Weight |
T |
5 |
5.5 |
10.5 |
Machine Specification
MOLD PART | ||
1 |
Injection core material |
S136 heat treatment to HRC 48-50 |
2 |
Injection cavity material |
S136 heat treatment to HRC 48-50 |
3 |
Blow mold material |
S136 heat treatment to HRC 48-50 |
4 |
Injection mold lifetime |
2 million shots |
5 |
Blow mold lifetime |
2 million shots |
CONFIGURATION OF MACHINE | ||
NO. |
Item |
Brand |
1 |
Hydraulic valve |
YUKEN |
2 |
Sealing parts |
SEALTECH |
3 |
Air service unit |
AIRTAC |
4 |
Air valve |
AIRTAC |
5 |
Air cylinder |
AIRTAC |
6 |
PC controller |
Mitsubishi |
7 |
Servo Motor for turntable |
Delta |
8 |
Gear reducer |
Asia Drive (China) |
9 |
Electronic Parts |
Schneider |
10 |
Motor |
JUNTE |
11 |
Oil pump motor |
Denison |
Machine Layout
A, High pressure air compressor
B, Gas storage tank
C, Cold and dry machine filter
D, Cooling tower
E, Water cooler
F, Low pressure air compressor
G, Mold temperature machine
H, Mechanical arm
I, Injection stretch blow molding machine
Station Injection Stretch Blow Molding Machine
1, Injection molding station;
2, Cooling, temperature regulation, pre-blowing station;
3, Stretch blow molding station;
4, Take out station.
Office Building and Factory Workshop
http://www.cr-isbm.com/